Many of the older members in SE MI know me from years ago. I pulled out of the hobby in 2009 due to the expansion of my family from one to four. Recently I have been looking into setting up a tank again. I have most of the equipment I need on hand, but I would like to do my own DIY LED...

Can anyone suggest a cheap LED light for my sump. I have an area that is 12"x12"x12" that has live rock and the drain from the main tank. I think i'm going to move a smaller fish into this compartment and then maybe do just mushrooms or something. I prefer it to be more on the blue side vs...

Hello everyone, ultra noob here. I was given a free biocube tank but no lighting and by the looks of it, I can easily save quite a bit of money by making my own. (It would be dimmable, have color spectrum control and night/day timer) I'm very technically proficient but new to the reef...

Just set it up today-

$300 OBO for everything. Selling off my 29 gallon biocube. It has dimmable DIY LED that cost over $200 Alone. I don't have time to take care of the tank. I am not interested in parting it out. I am not interested in shipping it...

AHOY! Well I have some equipment I would like to trade for corals. I have a DIY LED panel. 36x 3watt LEDS mounted on heatsink with optics and dimmable drivers. Two channels blue and white. Will grow coral like crazy. Very bright. I also have a 29 gallon standard drilled with a glass holes...

FS: Almost everything you need to light up a 18x18 tank. Only missing the BlueFish controller. $75 if you pick up at the Lansing swap. $80 shipped. I would prefer to sell all together, but will consider parting out if there is enough interest in all of the parts. I also have an O2Surplus PWM...

New DA ReefKeeper Elite V2 parting out This is brand new ReefKeeper Elite V2 still in boxes, never used or installed on the tank. I only tested moonlights, head unit and one of PC4. There are some items which are pending but this is first come first serve so if you are interested in pending...

Well as the story goes I have over about 1 years time ,I have bought all the equipment and built a still stand !this is in prep to set up a brand new 250dd tank in my basment! I have had a 60 cube running and growing off a d120 led from ebay!some what happy with color and growth but not fully...

Hello, I have a 29 gallon glass aquarium I am looking to sell. You will get - 29 gallon Drilled with glassholes overflow box and return. - Stand I ran a diy led over this tank with GFO/ Carbon, a mag 3, refugium, and skimmer. I would like to get 80$ for the setup. Txt me for pics...

I'm thinking about doing some DIY LED lighting. I did some research and I think I'm all set on how to make it but I'm just not sure what the beam angle of the LED's should be and what kind of power supply I should use. I seen some people have posted LED builds with multichip LED's on this forum...

Hello i have a drilled 40 gal. Breeder with center overflow box for sale. The tank comes with all the plumbing, tank, stand, 20 gal. Baffled sump, diy led light, and 2 bulb t5. The tank is in great condition. The stand is not the best but it is solid. I am asking 175$ obo. Text or pm anytime...

I have run out of wire that was sent with my DIY LED's. the wire they sent was a silver stranded wire. Can I use copper stranded wire of the same size. It would be running from control boards to my LED's on a heat sink.

12G Nanocube with Rapid LED kit (5 Blue, 4 White) retrofitted into hood Includes Neptune Aquacontroller Jr with DC8, temp probe and PH. One of the outlets on the DC8 is only on all the time, currently runs the koralia nano. Link below for info on controller...

I built this rack to hold 3 120w full spectrums over my tank. i got sick of the hanging look that ive had for a while and i really didnt want to hang 3 of them from the ceiling since they arent the lightest things in the world. on to the build Supplys are... 1.5" x 1/8" Aluminum Flat Bar 3/4"...

Doing a DIY LED project for the tank. Tank is a 24" cube. It is going to have 48 LED's total. 21 royal blue, 21 white and 6 violet. It is a Steves LED kit. The LED's are going to be 6" from the water line. I am wanting to put a plate glass about 1/2" from the LED's to protect them from water...

Hey guys, I'm not very tech savvy and have been using a Finnex Ray2 LED for my main 55-gallon, but will be acquiring a 29 biocube soon. I plan on growing coral so it will need a retrofit light, but don't want to spend a ton. I've been looking around...would either of these options work...

I work in a elementary school and since I had to take down my 90 gallon at home I have some extra supplies. I have a 25 gallon (24"L x 20"T x 12.5"W) I want to set up for salt water. I have plenty of live rock. I guess what I am wondering is recommendations on lighting and filtration. The lps...

I have the 29G Biocube RapidLED LED retrofit kit and the lights randomly went out. I tested everything and found that the voltage to the LED's is good (41.8v DC), I am not reading any Amps, i have only been able to read 15 microamps. This is on both drivers, i thought this might be too much of...

Looking to trade 60 cube (25x25x22) for some sort of AIO setup. Pm me if you have anything. I have a xs160 skimmer and DIY led lights as well.