Michigan Reefers banner

drill

  1. Premium Aquatics
    Ecotech Marine Vectra S2 Pump Giveaway You can enter up to 5 different ways and since you are on our email list already, you can get your first entry by just clicking the link below. Then do additional entries if you want. The deadline to enter is Sunday March 15th at Midnight...
  2. Lighting, Filtration and Other Equipment
    Ok. I have a 6ft 150 gallon that I'm setting up and it is drilled through the back wall along the top in three spots. One in each corner and one in the middle. How should i sure these holes? Drain, return, which one where? Thanks in advance!
  3. Want to Buy
    Reef ready preferred (Drilled and overflow) 92g all-glass would be nice but will consider a 54g.
  4. Selling Forums
    Price Reduced....Parting out complete system. 135 gallon rimless tank with steel stand 48x30x21 4 foot wide drill with overflows and 80 gallon and 40 gallon sumps fit in bottom of stand $450 https://photos.app.goo.gl/TbJLzE3v95QrGvZ37 48x18x24=85 gallons $30 48x13x16=40 gallons $20 4x24x24=10...
  5. Do It Yourself
    Hello all, I have a 14 biocube and I want to add a sump to my biocube so I can add a protein skimmer. I know people have said that a skimmer is not needed but after months and months of trying to lower my nitrates I really want to add something to help with nutrient export. I have tried...
  6. Lighting, Filtration and Other Equipment
    I am setting up a 30 gallon half moon tank for my seahorse with a 10 gallon sump. I had to drill on one side of the tank because I am plumbing through the wall and that is how the beams run. I am wondering if I can plumb the return and overflow right next to each other and have the return right...
  7. Selling Forums
    I have two tanks for sale. first up is a 20 gal long tank w/ stand and the second is a 30 gal. Dimensions for the 20 are 30x12x13 and the 30 gal are 30x12x23. Asking $30 for the 20gal which includes the stand or for $60 you get the tank, stand, 20-25 pounds of live rock and a powerhead. the...
  8. New to the Hobby
    Hi all, I got a marineland 75 gallon aquarium (48 x 18) and stand that I bought from petsmart. I am planning to drill holes on the sides for overflow and place a sump under the stand. The sump I got is a standard 20 long. The problem is the stand has a front center brace that is not allowing...
  9. New to the Hobby
    Okay, I have had 1 saltwater tank and it was a 29 gallon biocube. So I kind of just went with that setup. However I no longer have that and just purchased a 26 gallon acrylic tank. I have read most of the "new" or "read first" and can not seem to figure out what to do for filtration of I do...
  10. New to the Hobby
    Setting up a 22long and need 4 holes drilled in my tank for overflow/return!Where is a good place close that can drill it for a reasonable price! Troy/royal oak/Clawson is my area but will travel
  11. Selling Forums
    $400 for a 180 gal. 6x2x2 (not drill but do have a CPR overflow with pump) with black stand and canopy. This also comes with a 100 gallon sump that I had in the basement. this will not fit in the canopy, but of course you don't have to take it either...lol the tank is drained and in my garage...
  12. New to the Hobby
    reefers, I need to borrow a fish acclimation box. Let me know how much money you would like for me to borrow it for 2 weeks. Also if you are willing to sell it let me know the price
  13. Do It Yourself
    Downriver area anyone know of a place to get a small piece of glass to cover overflow holes on bottom of tank? Been looking with not much success. Found onedayglass online but 20$ for a 5x7" piece of glass then 15$ for shipping and handling... Big box stores don't have glass thick enough...
  14. Do It Yourself
    I'm looking to drill my tank for an overflow. Thinking of a Herbie overflow. A lot of people are saying it's better to drill the back panel glass, not the bottom panel. I can drill the bottom of my aquarium and was planning on doing that. Drilling the bottom will give a more cleaner look. It's a...
  15. Vendor Experiences
    I need a 16"x8" 1/4" thick piece of glass, where can I go to get something like this? Lowes and Home Depot only sell 1/8" thick.
  16. Want to Buy
    looking for someone with a scrap tank to get a center brace out of for my 125 gallon or some black 1/4 inch abs plastic for cheap so i can make one.Let me know, thanks mike
  17. Advanced Topics
    I'm bored and want to do some totally unnecessary work on my tank. I just had to drill into the floor to run an Ethernet cord and thought I could run some vinyl tubing from my 3 skimmer air intakes into the crawl space to get fresher air into the system and raise my PH. I don't even think I need...
  18. Reef Discussion
    So I got hooked up by someone who gave me a whole bunch of reef stuff (125g tank and stand drilled with overflows, 100+ lbs of dry rock, T5/Metal Halide Combo light 48", T5 48", large skimmer, etc) A few items need a little work or replacement parts, but I'm not opposed to it, besides I got it...
  19. Announce Frag Meets & Swaps
    NWIMAC Frag Fest 2015 Hey everyone we are 2 months away! The swap will be September 20th at Woodland Park in Portage, In It's at the same location as last years swap. $5 entry for ages 13 and over NWIMAC members with full membership will be free extra along with their family We will have...
  20. Selling Forums
    http://www.michiganreefers.com/forums/attachment.php?attachmentid=54897&stc=1&d=1434142396 MAKE AN OFFER!!!looking to sell whole or either all livestock and all drygoods separate. wife wants it gone we dont really have the time for it with young kids. over 20 corals tons of zoas. not alot of...
Top