65 Gallon Tank single overflow with durso standpipe very quiet with stand. Acrylic sump features 2 filter socks ATO storage container 5 gal. fits under stand next to sump Maxspect led 160w - Violet led lenses burnt, common problem - maxspect will replace and upgrade to a 120d lens for $100...

Ok so i just setup a 150 cube with overflow. I made durso because it had no pipes at all. Its 1" pvc all the way up with a T to a 90° elbow with a cap on top with small hole drilled in top big enough for flexible air hose. Under the tank the durso comes down a couple inches then to a 45 elbow...

got a couple of offers for the tank by itself, if I don't sell the pack by Friday I will sell the tank by itself. new prices all around. i bought this setup a while back and newer set it up. its time to let it go. 120 gallon 2x2×4 drilled bottom, dual corner overflow. one of the overflow...

I have for sale a nice 5/8" to 3/4" thick acrylic tank professionally built , it is an hexagon shape thank (special size and form as seen on picture) , I can provide dimensions if interested but think is about 62" long x 24" deep ; it comes with oak stand and canopy and includes sump and return...

Standard 75 gallon, not drilled, black silicone w/ stand. Tank is in great condition. Stand is OEM hardwood, but has been shortened from the bottom- could use some work to be very nice. $100/obo 50 gallon breeder, drilled for overflow on back glass w/ bulkhead- good shape. $50/obo 6' 135...

For sale is an All-Glass brand 220 gallon aquarium with a beautiful custom oak stand and canopy. The canopy is equipped with 2 heat sensitive exhaust fans that vent out the top. The aquarium is equipped with dual acrylic overflows, each with 2 - 2" bulkheads for inlet/outlet purposes. The silent...

Marineland 60 gallon rimless cube&stand*NEW PRICE Up for sale is a marineland 60 gallon cube rimless with marineland stand. Upgraded so this has to go, only had up for one month. Asking $400 for just tank and stand and glass top never used. Text 586-222-6184

This is a All-Glass brand 220 gallon aquarium with a beautiful custom oak stand and canopy. The canopy is equipped with 2 heat sensitive exhaust fans that vent out the top. The aquarium is equipped with dual acrylic overflows, each with 2 - 2" bulkheads for inlet/outlet purposes. The silent...

I have a used 110 gallon glass tall tank. Dimensions are 48" l x 18" wide x 29" tall Heavy glass tank drilled with center overflows with durso and return line. bulkheads broke. Tank has a couple chips in the outside corners, does not effect tank holding water, just not perfect. $150 or...

Just wondering if Glass Holes internal flow box can cause flooding problems during power outages or loss of syphon? I always hear of single syphon nightmares, and people suggest going with Durso or Bean Animal. Isnt Glass Holes internal overflow boxes basically a single syphon also? or is it...

I have a 120g hex flat back acrylic tank in good shape with a few scratches that can be buffed out easy. Has been drilled 4 times. 2 1" and 2 3/4 with custom lockline returns with durso drains with custom over flow boxes in center. Comes with a jet black acrylic stand and a custom built 38...

I'm getting out of the hobby and have lots of livestock and equipment to sell. I need this stuff gone soon! All prices are OBO. Also as far as the livestock goes I have individual prices listed but $300 dollars takes everything! The tang alone is worth 200 dollars! The colonies are large and...

I have a 46 gallon bow front reef tank. I just set up my sump, im using a cpr overflow box. everything is working the way its supposed to, but the drain that goes down from the overflow to the sump. stops about 6 inches from the water level in my first chamber. i was curious on if its ok to...

I am ready to order a 375 gallon acrylic tank. I am planning on two internal overflow boxes each with a 1.5" drain and a 1" return. I also plan to use a Durso in each drain. So what size should each overflow box be?

First off.. Some pictures of my 90gal aga rr tank. Setup with jebao 6000 returning through 3/4 PVC manifold. Drain is 1" PVC with durso stand pipe. Pipe is t'd off to refugium at opposite end of sump. I am freshwater testing everything currently to check for leaks, function etc...

Sold, Sold, Sold

Doing a system breakdown and i happen to have 7 24"x24" frag tanks. These tanks are not show worthy, however make for great use in a propagation or breeding setup.some of the glass is etched and some is clear still. All of them have been drilled in the bottom for 1" bulkheads ,some are drilled...

Thats the setup.. Nothing is glued and its a just a freshwater test. I get a ton of turbulence in my lines if I dont throttle back on the ball valve under the overflow.. is this normal? How far should my lines going into the refugium itself go under the water if at all? Im guessing that...

Just ordered a 165 gallon, stand, canopy etc. Steve was great. Cannot wait to get the tank in. Their stuff looks top notch and other reviews show they have a great product. He showed us everything, even offered up the Herbie overflow system instead of the Durso :)

Anyone try to resolve water drain noise with pipe insulation or boxing it in? It's also a peev of mine..... I can't imagine the drain EVER possibly having a full slug of water in it....