Michigan Reefers banner
modification
1-14 of 15 Results
  1. Selling Forums
    This is a Lifereef LF1125 / CLF1 Sump, $350. This is in good to very good condition. The size is 24" length x 13"wide x 14" height. It is designed for LF125 external return pump or CLF1 with internal return pump with minor modification. The sump cover is designed to accommodate a Lifereef...
  2. Lighting, Filtration and Other Equipment
    Hello reefers.. I am just attempting to find out all I can, as I only recently set up a reactor for the first time. It is up and running great, but I am wondering in particular, which media, why, and if anyone has any helpful links to sites, videos etc on anything associated that may be good...
  3. Lighting, Filtration and Other Equipment
    Is anyone on here a structural engineer or can help me with how large an aquarium I can put in my living room without any additional floor support? Thanks
  4. Advanced Topics
    Well I'm getting my 320 this weekend and I am considering cutting out the cross braces while it is empty, and replacing with one of 2 methods. I don't want the shadows that the cheap plastic braces make , so nows the time to modify if I'm ever going to do so. Any first hand experience with this...
  5. Lighting, Filtration and Other Equipment
    I'm hoping someone here can help me. I recently purchased a Coralife Biocube 29 that I was going to use for a couple fish and my frags. I purchased the InTank Media basket and the Tunze 9002 from a fellow reefer. I'm having a hard time, well actually I am unable to fit the skimmer in the...
  6. Reef Discussion
    Ok well I'm wanting to modify my center braces on my 180. Ya i know it's a semi risky modification, but I'm sick of the shadows that they create. I have seen afew different methods of doing it, just wondering if any of you have advice? ? Here are some pics I found on possible bracing methods.
  7. Lighting, Filtration and Other Equipment
    I just got a 24g Nanocube "Next Generation" LED nano, i am used to MH's with no real knowledge of anything LED. Powered by 13 CREE LED's, 1.3W 8 blue, 5 white. Am i limited to softies/LPS or are clams/sps possible without any modification to the lighting. Not just monti's, pocci, digi's, etc...
  8. Do It Yourself
    The 320 is been nitrate free since the implementation with the full flow avast biopellet reactor. I have always wondered how the corals would respond with a few tenths of nitrates per million which got me looking at the Reef Dynamic recirculation bio pellet reactor. Instead of dropping 5 bills...
  9. Selling Forums
    Hi, This Hydor nano Slim Skim skimmer was used for less than 2 weeks on my new AIO. I decided to go HOB instead. It works great and is like new. Still have box. Hydor Koralia Nano/Slim-Skim Internal Protein Skimmer $70 picked up in Howell or Plymouth PM Thanks ---------- Post added...
  10. Selling Forums
    I have a ASM G4X skimmer for sale. Gate modification has been done, also have the original standpipe. 2 pumps come with skimmer, one older with the mesh impeller modification done. the 2 nod pump is 2weeks old with no modification to the impeller. There was a crack in the cone of the skimmer...
  11. Lighting, Filtration and Other Equipment
    I have a Stupid question I have a 72 in Odessa t5 light and it has four 6ft 54w bulbs . Can I put 4ft 54w bulbs in their place ? . Thx Ron
  12. Selling Forums
    Selling altogether 29 Gallon biocube, everything is original with no modification. Lights seems ok, but should be changed. some fish food flakes, a test kit all in one strip tester, alot of chemical tester, a LED strip light set, and 3/4 of a 5 gallon sea salt bucket. Selling all for...
  13. Lighting, Filtration and Other Equipment
    So it seems quite a few of us picked up these LED's recently. I've heard rumors of being able to hook them up to an Apex and I'd love to know more about that. Anyone have any other tips/tricks? I'm picking up my lights today and I will post a before and after picture comparing my 14K halide...
  14. Lighting, Filtration and Other Equipment
    I will be modifying my Bulk Reef Supply Reactor to be a Recirculating pellet reactor with a separate control for media tumbling and a separate control for the output back to the sump. This will allow me to tumble at any rate I need without it effecting my output rate to sump (truthfully to my...
1-14 of 15 Results
Top