Search Results for ‘standpipe’

i have a 90gal 48x18x24 tank and stand. it is drilled with a center overflow. i have new bulkheads for the drain and return but it will need a standpipe made. i have some flex loc line and fittings for the return. the back is painted black. $250 i have a drilled sump with baffles. i believe its...

I finally got my 180gal with dual corner overflows up and running, but to keep my water level in my tank where it is not to high I can only go around 700gph, my drains have no problem keeping up with a faster flow but my overflow box cant handle the increased flow and the water level rises in...

Looking for some advice. I bought a Marineland 75g reef ready tank earlier this year. I thought it should be able to handle a 700gph pump. I've tried an Eheim 1260, and just now a Sicce 2.0 (568gph) and both of them run the return section dry. I've got the valve wide open on the overflow...

Merry Christmas everyone! I recently purchased a 90 gallon aquarium that has been drilled 3x in the bottom glass. From my research I see this is a very odd setup, essentially what I WANT to do, is setup a Herbie drain (unless there is a better option) unfortunately due to this odd drill setup...

I'm setting up a reef tank for a buddy, that happens to be very particular on where and what he wants. So, he wants the tank to be in his wall, viewed from both sides and a center overflow. My thought is to have the tank drilled for one-1.5" drain and run the return around the side in the wall...

65 Gallon Tank single overflow with durso standpipe very quiet with stand. Acrylic sump features 2 filter socks ATO storage container 5 gal. fits under stand next to sump Maxspect led 160w - Violet led lenses burnt, common problem - maxspect will replace and upgrade to a 120d lens for $100...

ESHOPPS wet dry filter WD-75CS $100

I have a clarity plus with an integrated back chamber and I am trying the quiet down the noise of the water flowing into that chamber sort of like into a overflow. Any suggestions??

Anyone try to resolve water drain noise with pipe insulation or boxing it in? It's also a peev of mine..... I can't imagine the drain EVER possibly having a full slug of water in it....

Can anyone tell me what the cylinder in the overflow box is for? I believe it drains the water to my sump, but it is being very noisy at the moment. It appears to have an air valve at the top, but I'm not sure about that. I'm hesitant to mess with it. Anyway to quiet it down?

Pain in the butt. Got it used thing is huge hope its just trying to break in butit fills with water to quick. Wondering if Ijust have it sitting in water to high or to low? Does anyone have experience with these? I have 1 in pvc going right to the needle wheel pump from my HOB overflow.

Okay, I have a 195g with 1800 gph overflow from GLA and using a waterblaster 10000 hy as return with a 100 g Rubbermaid sump. I have about 4' of head pressure. The standpipe in the overflow box for the drain is a durso design and was making the toilet flushing sound so I drilled the existing...

I'm looking a one or two 65 gallon breeders?

I have a ASM G4X skimmer for sale. Gate modification has been done, also have the original standpipe. 2 pumps come with skimmer, one older with the mesh impeller modification done. the 2 nod pump is 2weeks old with no modification to the impeller. There was a crack in the cone of the skimmer...

I am looking for a filter/sponge and perforated standpipe to go in my new tanks built in overflow. I have one in my existing tank and it looks like this. Call me or PM me. My number is 616-510-3926 name is Adam.

Added a yellow watchman Gobie and tiger pistol shrimp today. I've been excited to have them from day one. I tried placing them in a glass for sometime on the bottom, waiting for the shrimp to create a burrow. took the glass off and my shrimp is now hiding in live rock and the watchman is...

I recently bought a marineland corner flow tank pre drilled and I set it up and if I have my return pump on higher than 10 to 15% I get bubbles shot foen my return and into the sump. It's the nasty waterfall burping noise I don't know why or how to fix it. Anyone have any help?

I've got a single return pump and I'm adding a second one. I have 2 seperate returns to the display tank and I'm wondering, should I direct plumb each return line to its own pump, or should I make a manifold?

Does anyone use the Durso standpipe?? I have 1 inch bulkheads and recommends using 1 1/4 inch pvc. Is this necessary? Any input or tips would be greatly appreciated.

I am moving across the country in December and want to find a good home for my tank. It is well established 2 year old tank. I am parting it out. Below is a list of everything included. If you want to see better pictures or take a look, let me know. I have a somewhat flexible schedule...