Joined
·
391 Posts
All set. Please delete.
300-600gph Return Pump
1 - 12 of 12 Posts
Joined
·
473 Posts
It's a mag drive 9.5 NIB
![]()
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
391 Posts
Unfortunately that would be a little to big to fit within the false wall of the NanoCube I need it for.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
473 Posts
Common go big or go home..
No problem though I might be able to help you out...
Sent from my iPhone using Tapatalk
Joined
·
391 Posts
Appreciate the offer but if the dimensions in the pic you posted are correct there’s just no way to make it fit. If you have anything smaller let me know!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
473 Posts
That's the smallest I have i tend to have a problem with redundancy.
I over buy, I'm building Red Sea 650p and it's one of my backup up pumps.
Sent from my iPhone using Tapatalk
Joined
·
391 Posts
Gotcha. I used to have a RedSea MAXX, by far one of my favorite tanks. Good luck with your build.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
473 Posts
No problem I'm like At 75% just need lighting and a controller.
We're almost there...
![]()
Sent from my iPhone using Tapatalk
We're almost there...
Sent from my iPhone using Tapatalk
Joined
·
2,412 Posts
maxijet 1200 would be on the low side of that target flow, but would also likely fit. I have 2 (actually 14, maybe 15) new in the box if you are interested.
I use them for stand alone reactors most often. Practically indestructible.
Aquaclear 70's would be a better fit for your flow needs - I like those blocks even more than the maxijets. I don't have any of those I'm willing to part with however.
Joined
·
391 Posts
Yes I tried a maxi jet and flow was still on the low side. Hadn’t thought about the aqua clears
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Joined
·
2,412 Posts
So I found these on CL...
he thinks very highly of them and appears to believe google doesn't work for other people, but you might be able to work a deal...
HTH
It's merely coincidence we are in or near the same town - I have no idea who this is.
Joined
·
391 Posts
Unfortunately Grand Rapids is quite a bit to far from me at about a 3 hour drive each way.
Sent from my iPhone using Tapatalk
---------- Post added 05-02-2018 at 01:36 PM ----------
I'm thinking a Rio 400-600gph is going to be the size and flow output I need. If anyone has one let me know!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
---------- Post added 05-02-2018 at 01:36 PM ----------
I'm thinking a Rio 400-600gph is going to be the size and flow output I need. If anyone has one let me know!
Sent from my iPhone using Tapatalk
1 - 12 of 12 Posts
