Michigan Reefers banner

1 - 15 of 15 Posts

·
Registered
Joined
·
300 Posts
Discussion Starter #1 (Edited)
(Prices and availability updated July 3rd)

1) Trigger Crystal Cube 18 Sump $100
See mfg's specs for dimensions, sells new for $270-$300. Minor scratches as expected for an acrylic sump. Sump only.

2) Reef Octopus 100INT $60
I am the original owner. Includes flared output fitting and original powerhead/feed pump. Soaked and scrubbed.

3) 2 x BRS 1.1mL dosing pumps - $20 each
I am the original owner of both. Not much to say about these. Peristaltic pumps, pretty reliable. Best on a timer or controller.

Thanks for looking. If you have any questions please ask.
 

·
Registered
Joined
·
300 Posts
Discussion Starter #7
Thank you all for the interest. I've got 16 PM's to go through which will take some time (won't be home until later tonight).

The sump is acrylic and fine, only the 60 glass cube blew out.

edit: I'm updating the OP to reflect items people are interested in. i'm going first come first serve on items based on first person to PM regarding an item. will update as things sell or if people back out

---------- Post added 05-22-2019 at 09:20 PM ----------

OP updated for pending items. For what's remaining -- tank, AFS, skimmer -- make me an offer.

Will also have a larger, older skimmer, mag float glass scraper and some other random stuff posted this weekend.
 

·
Registered
Joined
·
300 Posts
Discussion Starter #8
OP updated. I've gotten many PM's on certain items and when I reply, radio silence. Sold items reflected above, any "pending items" listed I haven't heard from the interested party in a few days regarding I've stripped the pending tag
 

·
Registered
Joined
·
659 Posts
OP updated. I've gotten many PM's on certain items and when I reply, radio silence. Sold items reflected above, any "pending items" listed I haven't heard from the interested party in a few days regarding I've stripped the pending tag
Zach, I had the same problem with people telling me this and that making deals and then crickets!! people here are crazy these days. my solution ,just through it away ,its way easier in my opinion however not saying you should do this .

I was inspired to respond to this seeing as you have had many blowouts. I to had many blowouts in the past and all occurred almost immediately after installing mp40s and mp60s. they are just beast ,but really its the big azz wave they send slamming off the ends of your tanks. really though imagine a real heavy guy shoulder checking the ends of your aquarium nonstop, the seal is going to give. now in my case this happened sooner than later because the tanks were all older not brand new. just thought id throw this out there , not saying throw your MPs out just consider the wave you have them throwing about. this may not even be the problem but it was for me. hopefully this helps someone.
 

·
Registered
Joined
·
300 Posts
Discussion Starter #10
Zach, I had the same problem with people telling me this and that making deals and then crickets!! people here are crazy these days. my solution ,just through it away ,its way easier in my opinion however not saying you should do this .

I was inspired to respond to this seeing as you have had many blowouts. I to had many blowouts in the past and all occurred almost immediately after installing mp40s and mp60s. they are just beast ,but really its the big azz wave they send slamming off the ends of your tanks. really though imagine a real heavy guy shoulder checking the ends of your aquarium nonstop, the seal is going to give. now in my case this happened sooner than later because the tanks were all older not brand new. just thought id throw this out there , not saying throw your MPs out just consider the wave you have them throwing about. this may not even be the problem but it was for me. hopefully this helps someone.
I appreciate the input on the blowouts. The first two on my old 120 were because I resealed it wrong AND had it on an unlevel stand. This one is confusing to me because I had it on a purchased stand placed on a level concrete pad I poured. The only thing I could think of was the radion being mounted on the tank caused the glass to bow a little but the MP40 idea makes a lot of sense as well. Maybe both together.

It's a bummer because I did everything I could to make sure this tank was perfectly level and blowout-proof but here we are
 

·
Registered
Joined
·
300 Posts
Discussion Starter #12
I believe at this point I'm caught up with PM's and people that asked for pictures of the tank and sump. If I forgot you shoot me a reminder PM and I'll get on it. I had about 30 PM's to crawl through and may have missed you. Managing more than one conversation at a time on this site is an exercise in patience to say the least
 

·
Registered
Joined
·
300 Posts
Discussion Starter #13
Bump: Prices lowered. I'll be home for the next couple days and available to respond to PM's and texts. Would like the cursed glass box (and lovely sump) off my basement floor.
 

·
Registered
Joined
·
300 Posts
Discussion Starter #14
Bump, prices lowered again. Make me an offer on the tank, it needs to be gone by next sunday and i'd prefer it not be donated to the garbage man
 
1 - 15 of 15 Posts
Top