Michigan Reefers banner
1 - 7 of 7 Posts

· Registered
Joined
·
2,996 Posts
I bought that exact same one a few months back. It works well, but starting the siphon can be a bit of a nuisance, but once going it stays prety solidly flowing, and it's decently quiet....but with my halides and fans going, it pretty much drowns out any noise from the overlflow!
 

· Registered
Joined
·
1,150 Posts
I think I remember a concern with the dual u pipes. If you set up your system to flow both and 1 fails, your gonna have a flood. I suppose it's similar to having one tube fail but now multiply that risk by 2. Upsize the u tube to 1 1/2" (homemade) and you won't have that problem. If you make a homemade tube, add a powerhead in your system with an airline connected to the top of the u tube. If the tube ever loses siphon, the powerhead should have enough pull to draw the air out and restart the flow before you flood. Good luck.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top