I think it's more the bulkhead size that limits the flow.
And possibly the id of the siphon tube.
And possibly the id of the siphon tube.
Approx. GPH ???
Anyone please wanna take a guess on the GPH for an overflow with demensions ... 4d X 6W X 10 tall?
Just wandering if thats atleast 600 gpm?
It was operated before with a Rio 2500. I'll be using a Mag 7 with it.
thanks,
Just wandering if thats atleast 600 gpm?
It was operated before with a Rio 2500. I'll be using a Mag 7 with it.
thanks,
1 - 2 of 4 Posts
From the RC overflow calculator:
Using the following input parameters
Gallons per Hour = 600
Drain and Overflow sizes are calculated as
Recommended minimum drain pipe diameter = 1.01 inches
Recommended minimum linear overflow size = 9 inches
Using the following input parameters
Gallons per Hour = 600
Drain and Overflow sizes are calculated as
Recommended minimum drain pipe diameter = 1.01 inches
Recommended minimum linear overflow size = 9 inches
1 - 2 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Michigan Reefers
Michigan Reefers is dedicated to the marine reef aquarium hobby. Learn more about reef aquariums and maintenance, and view our large collection of coral and marine fish photos.
Full Forum Listing
Top Contributors this Month
View All
taishandragon
33 Replies
sprintz519
12 Replies
Ober-Wan
11 Replies
