Michigan Reefers banner

DIY LED, Drilled 29 gallon for Coral

609 Views 4 Replies 2 Participants Last post by  AV8TOR

Well I have some equipment I would like to trade for corals.

I have a DIY LED panel. 36x 3watt LEDS mounted on heatsink with optics and dimmable drivers. Two channels blue and white. Will grow coral like crazy. Very bright.

I also have a 29 gallon standard drilled with a glass holes overflow and a stand. good shape with only a few minor scratches.

In addition I have a BRS style dual cartridge reactor and another LED panel. I would need to solder the drivers back in place on this one as they were last run remotely.

Looking to trade for almost any type of coral. Leathers, LPS, ZOAs, SPS... Let me know what you have. might have to pass on some of the more demanding SPS as the tank is only around 9 months old.

Let me know what you are looking to trade!


1 - 3 of 5 Posts
I am in Plymouth / Livonia area. The fixtures are Bridgelux LESs. I have used both Cree and Brideglux side by side and have not noticed a difference. They are very powerfull.

Let me know if interested... PM is best. LEDS are on a black aluminum heatsink with drivers and fan mounted on top. The pots for dimming are mounted on a 3D printed bracket making for easy adjustments and pretty clean look. Optics included. Also the 29 is sitting in my garage clean and ready to go.
Tried to pm but it said my quota had been exceeded? Anyhow I am interested in the leds.I have coral to trade .
Sent you a PM. Let me know if it doesn't come through.

1 - 3 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.