Michigan Reefers banner
1 - 3 of 3 Posts

·
Registered
Joined
·
531 Posts
I think you need to create an alarm with the input as the temp. Then add the alarm to the channel(outlet) you want and it should have an action with it, like turn on/off when above/below whatever temp you want. I am going from memory, but I think it should follow along these lines.
 

·
Registered
Joined
·
535 Posts
wbond is correct.

You have to create an alarm and then tell the controler to turn the lights off when the alarm activates. Also not sure if you doing this on the actual face uint but it's WAY easier on the computer.

This helped me a ton:
 
1 - 3 of 3 Posts
Top