Michigan Reefers banner

Need help QUICK

502 Views 4 Replies 4 Participants Last post by  shermlock
I need someone with a standard 55 gallon glass tank to measure the inside of the black plastic. on the top of the tank there is that black plastic support I need the measurement of open space from inside to inside for the width of the tank as accuarate as possable 1/16ths if possable.

Thanks all
1 - 1 of 5 Posts
Great point Ken. I made that mistake making a canopy and I was off 1/8 of an inch. I couldn't figure out why. I measured and remeasured and reremeasured only to find out that I had measured a different brand of tank.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.