Michigan Reefers banner


2124 Views 6 Replies 6 Participants Last post by  Tide2Water
Is it ok to use 1/4 in plexiglas, purchased at Home Depot, to partition my sump ?

I know I can use glass or acrylic but plexiglas would be easier, cheaper, and quicker for me. But, I won't waste my time if I can't use it.
1 - 1 of 7 Posts
I used a 60g long glass tank for my sump/refuge and used Plexiglass for the partition with no problems. Been there for over three years. Just use silicone and put a bead on both sides of the plastic. Use the thicker plastic, it won't bow from the weight of the water.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.