Michigan Reefers banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,482 Posts
Discussion Starter · #1 ·
I have my temp set at 78 on my reef keeper but the temp bounce between 78.0 and 78.1 which make the heater turn on and off rapidly. I also have to listen to the reef keeper clicking every time it turns on and off. Do I need a new temp probe. The heater and temp probe are both in the sump on my main floor under my display. Any help would be helpful. Thanks Russ
 

·
Super Moderator
Joined
·
1,745 Posts
You need to change the hysteresis. Probably set to .1 you should make it at least 1.0, that means that the temp will drop to 77 before it turns on.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top